Bought the car back in 2004, and have been slowly building it from the driveline up. Had the MS3 and PRC heads left over from before and figure it will make a unreal sleeper other than being louder than all sin. But that cam will not lobe like it will in the stock 346. Still in the process of building it and putting it together. Should be done/tuned by the end of the month (April 2009).
N/A
mid 2001-2002 Speedline WS6 17x9s
2- 17x9.5 Black ZR1s for the track
N/A
Forged 408 Iron Block
*-2cc Wiseco coated
*Compstar rods and crank
*ARP rod bolts & head studs
SLP Lid
85mm Z06 MAF
PTM 95mm Throttlebody
ported FAST92 intake manifold
Magic Stick 3(114LSA)
LS7 Lifters
Yella Terra 1.7 non-adjustable rockers
PRC Stage 2.5 5.3 220cc heads undecked
ARH 1-7/8"x3" Longtubes
ARH Offroad Ypipe
Magnaflow thunder Catback
Racetronixs fuel pump -(awaiting install...)
FAST 36# injectors
LS2 timing chain
ported LS6 oil pump
hardened pushrods
MSD 8.5 wires with NGK TR55s
Powerbond 25% pulley
Hypertech 180* thermostat
BMR Adjustable Torque Arm
Adjustable PHR
Lower Control Arms
Subframe Connectors
UMI Torque Arm Relocation Crossmember
Tubular K Member -(awaiting install...)
Six Speed Inc Stage 3 T56
LS7 Clutch
3" Chromemoly Driveshaft
Strange S60(35spline, truetrac, and 4.10s)
Mcloed Adjustable Master
Updated slave
B&M Ripper Shifter
HP Tuners Tuning Software
Innovative wideband for both banks
Heads and Cam that fit the 408 a little better, Upper and Lower A Arms, Strange front coilovers, and still thinking about the rear...
4 Comments on DVS99TRANS's Trans Am
Sweet ride, I like your style! I have a modded T/A and a Trailblazer SS. I think if you have a Trailblazer SS it only makes sense to have an Fbody too!
Great looking T/A. 15 stars.
That would be awesome. All in good fun
NIce Mod list, and great looking bird!