Rumpity Rump
It is a 65 Chevelle with a sbc 355 producing 460hp.
It is shifted through a 700R4 and a 9 1/2" 3400 rpm converter and ends up getting to the ground via a 10 bolt posi sporting 3.73 gears.
The engine is a vortec hyd roller motor.
10.5:1 C/R
Cam .240 @ .050, and .544, .555 lift with 1.5 and 1.6 rockers.
Bottom end is all forged internals.
Edelbrock performer rpm
Mighty demon 750
MSD Pro-billet running 18 degrees inital and 34 degress total for 93 octane.
MSD 6AL with a 6500 chip
Holley blue pump
1/2" fuel line from tank to carb
Runs 6 1/2 lbs of fuel pressure
Interior is fresh except for headliner
Paint is older but still looks ok
not really much more than a clock
slicks, paint
seats tach shift light guages switch to aux electric cooling fan
low 12 second street driven
1 5/8 front sway bar, new upper and lower control arms, new shocks, springs
700R4 Trans with stage 2 shify kit, 9 1/2" converter stall is 3400
Rear is a built 10 bolt with an Eaton Posi, 3.73 gears, Strange billet axles and c-clip eliminators
AM/FM 8-Track Player
N/A
16 Comments on chevguy65's Chevelle
View All Comments >>
Nice car.
Nice '65.
Sounds real good too.
Hey Carl, gone racing this year as of yet?
That 65 has class man very nice car!
Thanks Dan!
I appreciate the kind words!
As you know it is the love of my life and I spend as much time with it as I can.
I hope to some day make it out to see your 70, but in knowing you I have no doubt it is one of the finest 70's out there
Now that I have had a chance to see it in person, sit in and hear it run, all I can say is that I can now confirm that is one NICE 65 Chevelle!!!
Really nice ride!
Dude your sound clip of the engine cammin is amazing
Thanks for all the great comments.
What can I say...I love my 65!
View All Comments >>