BuickLou's 1983 Buick Le Sabre

Factory Options:

N/A

Exterior Modifications:

wheels and tires, rear bumper from caprice, hood pins

Interior Modifications:

hurst V matic 2 floor shifter, swivel bucket seat frames from 1974 leguna with summit racing buckets seats mounted on them, simpson racing 5 point harness, auto meter gauges, and painless switch panel

Performance:

4 blot main .040 over 384cid sbc, 3.75in. stroke foreged eagle crank, 5.7in foreged I-beam eagle rods, ross racing foreged aluminum 11 to 1 compression pistons,aluminum 23degree brodix heads(CNC ported), manly race flow 2.02 intake and 1.6 exaust valves, lunati .606 intake .585 exaust lift sloid roller cam, lunati 1.6 ratio rockers, lunati springs, lunati roller lifters, comp cams cromemoly one Piece pushrods, holly street dominator intake(port mached to heads), holly 770 street avenger carb, 1 7/8in primary tube 3.5in collector hooker supercomp headers for 1st gen camaro(only ones in 1 7/8in primary tube headers that would fit in the car right. TH-400 with 4000 stall, 4in steel drive shaft, 8.5in gm 10 bolt with 33 spline moser axels, spool, c-clip eliminator, 4.88 gear and summit cover with Girdle, custom aluminum trans crossmember.

Misolanious- .250in aluminum motor plate, marks pully system, ajustable timming marker, 20 gallon aluminum fule cell, rearmount optima battery, remot mount oil filter, oil cooler/trans cooler with 1750cfm electric fan, flexlite dule radiator fan, extra cool radiator, costom alumminum heater box to delet AC.


soon to come: trans break, brodix single plane intake, 950 holly DP, two step box!!

Suspension/Chassis:

front - springs cut 2in, comp. enginering drag shocks, poly grafite bushings
rear- custom 4 link i built, uppers are adjustable, all sloid stainless steel bushings, anti rool kit, 12 way adjusatble QA1 shocks, stock springs.

Frame is all boxed and some other crossmember welded in to stiffen it up.

Drivetrain:

N/A

Electronics:

LM1wide band with RPM converter, electric water pump, electric fule pump, mallory unilite distributor, mallory 6A box, mallory coil, and mallory 8mm wiers.

To-Do List:

N/A